Resources
Norms & Standards
Thermatek® products meet rigorous global standards, ensuring safety, reliability, and efficiency in cold storage heating solutions.
Certified compliance with industry standards
Find below all standards we adhere to in producing our products. Write to us at sales@thermatek.co.uk for any additional questions you could have.
| Standard Number | Standard Name | Description (Relevant part) | Thermatek relevant product(s) |
|---|---|---|---|
| BS EN 10088-3:2014 | BS EN 10088-3 mechanical properties – austenitic stainless steels | Grade 302S31 | Stainless Steel Heating Elements composition |
| EN60085 | EN60085 European standard used to evaluate and designate the thermal properties of electrical insulation materials and systems | Class 120 (Formerly class E - 120°c) Materials with additional Class 155 (Formerly class F - 155°c) designs from 100va to 4kVa | Transformers |
| UL94-V0 | UL94-V0 is a flammability rating for plastics that indicates how well a material resists catching fire and self-extinguishes. It's one of the highest levels of flame retardancy certification. | The transformers use moulded bobbins to pattern of ‘Miles Platt’ or ‘Formers’ imperial sizes Nylon 66 | Transformers |
| BS EN 10106:2015 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state | E&I Laminations | Transformers |
| EN60317-13 | EN 60317-13 is a European standard that specifies the requirements for a particular type of winding wire, specifically a round copper wire with a dual coating where the base layer is made of polyester or polyesterimide resin and the top layer is a polyamide-imide resin, classified as "Class 200" due to its high temperature resistance capabilities; essentially, it defines the properties and specifications for this type of enamelled copper wire used in electrical applications. | Copper winding wires | Transformers |
| IEC60464 Part 2 | IEC 60464-2 is a part of a series of standards that specify test methods for varnishes used in electrical insulation | Insulating property of varnish | Transformers |
| BS EN 50525-3-41:2011 | Previously BS7211 | Copper Cold Tails 2.5mm² | |
| EN60076-1:2011 | Power transformers - Part 1: General | Transformers | |
| BS EN 60885-3:2004 | Electrical test methods for electric cables – Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | Designed Temperature Class of transformer wire | Transformers |
| EN60317-13:2010 | Requirements of enamelled round copper winding wire of class 200 with a dual coating. | Transformers | |
| BS EN 60335-2-96:2002 | Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating | ThermaMod | Flexible heating elements |
| IEC 60364-7-753:2014 | Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and embedded heating systems | Designed to meet appropriate installation location | Overall FHP Solution? |
| IEC EN60519-10:2013 | Safety in electroheating installations – Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications | Trad appliance standard | Heating Elements |
| BS1554 (Grade 302S31) | BS 1554, Specification for stainless and heat-resisting steel round wire, was published in 1990. It covered a wide range of steel wire grades | Stainless Steel Wire | Heating Elements |
| EN 60800:2009 | Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation | Use case | Heating Cables |
| DIN EN60811:2012 | Insulating and sheathing materials of electric and optical cables Common test methods | Outer Diameter measurement | Stainless Steel Heating Elements - Green Sheathed |
| EN61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements | TLZ 11X Compliance - Safety | |
| EN61326-1:2013 | Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements | TLZ 11X Compliance - EMC | Thermostat |
| EN 61558-2-23:2010 | Safety of transformers, reactors, power supply units and combinations thereof – Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | Manufacturing method, wire winding, current and temperature capacity | Transformers |
| IEC EN62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications – Part 1: General and testing requirements | FHP | Heating Elements |
| CE Marking | CE Marking | The CE marking is a certification mark that signifies a product’s conformity with European Union health, safety, and environmental protection standards. It is a declaration by Thermatek™ that our products meet all applicable EU directives and regulations, enabling them to be marketed and sold throughout the European Economic Area (EEA). For Thermatek® electric heating systems, CE marking demonstrates compliance with directives such as the Low Voltage Directive (LVD) and the Electromagnetic Compatibility (EMC) Directive. This reflects our ongoing commitment to safety, performance, and full regulatory compliance. | |
| IEC EN62395-2:2013 | Electrical resistance trace heating systems for industrial and commercial applications – Part 2: Application guide for system design, installation and maintenance | FHP | Heating Elements |
From design to installation: your partner in cold storage protection
At Thermatek, we guide you through every step of your cold storage project. From tailored designs that address your unique challenges to seamless installation, we deliver solutions that protect your infrastructure, optimize efficiency, and provide long-term peace of mind.
Installation & maintenance
At Thermatek®, we don’t just supply heating systems — we ensure they perform flawlessly throughout their lifespan, providing design, consultancy, and technical support with over 35 year of expertises
Documentation
Find all relevant documents to help you know Thermatek and understand our systems : company brochure, tech sheets, FAQ…
We’d love to hear from you
Have a question about our heating solutions or need expert advice for your cold storage project? Our team is here to help. Contact us today to discuss your needs, request a quote, or get technical assistance.
Contact us today to discuss your needs, request a quote, or get technical assistance.
5a, Station Yard, Station Road, Hungerford RG17 0DY / UK
sales@thermatek.co.uk
+44 (0)1488 684888
